Kyocera FS-C5100DN - Manual (Page 71)

Advanced
Selecting a Prologue/Epilogue File
A Prologue/Epilogue file must be available on your system before it can be
added to a print job. To create this file, use a text editor like Windows Notepad.
In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file to insert
into the print job. (If no file names are visible in the list, you must click Add to
browse for files on your computer or network to add to the list.) After the file is
selected, insertion point options will be enabled.
Editing a Prologue/Epilogue File
1 In the Prologue/Epilogue dialog box, select a command file name from the list,
and then click Edit. Microsoft Notepad opens for editing the text file.
2 Make your changes to the file.
3 Save the file, and exit Microsoft Notepad.
Note: Editing and saving a command file overwrites the contents of the
existing local or network file.
Deleting a Prologue/Epilogue File
1 In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list, and then click Delete.
2 In the delete confirmation box, click Yes to accept.
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
Assigning a Prologue/Epilogue File
1 In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list.
2 Under Insertion Point, select a place to insert the Prologue/Epilogue file.
Unassigning a Prologue/Epilogue File
When you designate a Prologue/Epilogue file as unassigned, you are
removing it from the print job. It remains in the list. Unassigned selections are
useful when the list contains several Prologue/Epilogue files, and you want to
use some but not others.
1 In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name
from the list.
2 Under Insertion Point, select Unassigned.
KX DRIVER 9-2