Kyocera FS-C5100DN - Manual (Page 35)

4 Basic
In the
Basic tab, you can specify the most commonly used printer driver
settings.
Basic Paper Settings
The Basic tab contains several settings for basic printing tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to
Auto source selection.
Media type
This setting selects the
Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Destination
KX DRIVER 4-1
This setting specifies which output tray is used for the print job output.