KTM 450 SMR - Manual (Page 60)

MAINTENANCE WORK ON CHASSIS AND ENGINE
58
 
Fitting glass fiber yarn filling of main silencer ‘
x
500226-11
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Attach the glass fiber yarn filling to inner tube ‘  . Fit the inner tube into the outer
tube ‘  .
ಥ Insert cap ‘  . Mount and tighten screws.
ಥ Attach the glass fiber yarn filling to insert ‘  . Fit the insert into the outer tube ‘  .
Mount and tighten screws.
ಥ Insert end cap ‘  . Mount and tighten screws.
ಥ Fit the main silencer. ( P. 57)
 
Changing glass fiber yarn filling of main silencer ‘
x
ಥ Remove glass fiber yarn filling of main silencer. ( P. 57)
ಥ Fit the glass fiber yarn filling of the main silencer. ( P. 58)
 
Dismounting the air filter box lid
500222-10
ಥ Pull off the air filter box lid in area ‘ to the side and remove to the front.

Installing the air filter box lid
500222-11
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Insert the air filter box lid into the rear area ‘ and clip it into the front area ‘  .

Removing the air filter ‘
x
Note
Engine failure ಗUnfiltered intake air has a negative effect on the service life of the engine.
ಥ Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard ಗProblem materials cause environmental damage.
ಥ Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
ಥ Dismount the air filter box lid. ( P. 58)
500223-10
ಥ Undo the hose clip ‘  .
ಥ Remove the air filter.