Kenwood TH-K2E - Manual (Page 114)

100
VOX on Busy
You can configure the transceiver to force VOX
transmission even if the transceiver is receiving a
signal.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 21
(VXB).
3 Press [MENU].
4 Turn the Tuning control to select “ON”.
• To suppress the VOX transmission when the
transceiver is receiving a signal, select “OFF”.
5 Press [MENU] to store the setting or [PTT] to cancel.
Note: You can press [PTT] or [CALL] (if 1750 Hz is programmed) to
transmit, regardless of Menu No. 21 (VXB) settings.