Using the tuning control, Using a numeric keypad (th-k2at/ et/ k4at only) – Kenwood TH-K2E User Manual
Page 60
46
Recalling a Memory Channel
■
Using the Tuning Control
1 Press [MR] to enter Memory Recall Mode.
•
The memory channel last used is recalled.
2 Turn the Tuning control to select your desired
memory channel.
•
You cannot recall an empty memory channel.
•
To restore VFO Mode, press [VFO].
■
Using a Numeric Keypad (TH-K2AT/ ET/ K4AT only)
You can also recall a memory channel by entering a
desired memory channel number with the keypad.
1 Press [MR] to enter Memory Recall Mode.
2 Press [#], then enter the channel number using
2 digits.
•
For example, to recall channel 49, press [#], [4],
[9].
•
You can also enter a memory channel number that
is less than 10 by pressing [#] after entering the
channel number. For example, to recall memory
channel 9, press [#], [9], [#]. You can also press
[#], [0], [9].