Kenwood TH-K2E - Manual (Page 46)

32
O
FFSET
P
ROGRAMMING
F
LOW
q
w
e
r
t
Select a receive frequency.
Select an offset direction.
Select an offset frequency
(only when programming odd-split
repeater frequencies).
Activate the Tone function
(if necessary).
Select a tone frequency
(if necessary).
If you store all the above data in a memory channel, you
will not need to reprogram the parameters every time.
Refer to “MEMORY CHANNELS” {page 41}.
Programming an Offset
You must first select an amateur radio repeater downlink
frequency as described in “Selecting an Offset
Frequency” {page 33}.
■ Selecting an Offset Direction
Select whether the transmission frequency will be
higher (+) or lower (–) than the reception frequency.