Kenwood TH-K2E - Manual (Page 93)

79
Transmitting a Stored DTMF Number
1 While pressing and holding [PTT], press [MENU].
2 Release [MENU] (continue pressing [PTT]), then
turn the Tuning control to select the desired DTMF
memory channel number.
3 While still holding [PTT], press [MENU] again to
transmit the selected DTMF tones.
• The number stored in the channel scrolls across the
display, accompanied by DTMF tones from the
speaker.
• After transmission, the frequency display is restored.
TH-K2AT/ ET/ K4AT only: If you do not need to confirm the
memory channel contents, press [0] ~ [9] instead of turning
the Tuning control in step 2, to select a channel number. The
stored DTMF number will be immediately transmitted. (You
do not have to press [MENU] in step 3.)
Note: If you select an empty DTMF memory channel and press
[MENU], the frequency display is restored.