Kenwood TH-K2E - Manual (Page 79)

65
P
RIORITY
S
CAN
You may sometimes want to check your favorite
frequency activities while monitoring other frequencies.
In this case, use the Priority Scan function. Priority
Scan checks the activities of the Priority Channel every
3 seconds. If the transceiver detects a signal on the
Priority Channel, it recalls the frequency.
Note: If you do not operate any control or key for 3 seconds after the
signal drops, the transceiver returns to the original frequency and
resumes Priority Scan.
Programming Priority Channels
1 Press [VFO].
2 Turn the Tuning control to select your desired
Priority Channel frequency.
3 Select selective call functions, if necessary.
4 Press [F], [MR].
• The memory channel number appears and blinks.
5 Turn the Tuning control to select “Pr”.
6 Press [MR] to store the data on the Priority Channel.