KORG MR-1 - Manual (Page 12)

12
2. Connecting your monitor equipment
Connect stereo headphones to the headphone jack. Use the volume buttons to adjust the vol-
ume. If you're connecting the MR-1 to a monitor system, connect your stereo cable (mini) to the
OUTPUT.
Connecting headphones won't cut the sound from the output jacks.
If you're recording from a mic, we recommend that you monitor through headphones to reduce the
risk of acoustic feedback.
3. Turning the power on/off
The MR-1 contains an internal hard drive, and is a precision device comparable to a computer.
You must observe the following procedure when turning the MR-1 on or off.
Turning the power on
Slide the power button down. After the opening screen, the level meter screen will appear.
Opning screen Level meter screen
If the MR-1 is running on its battery and the power won't turn on, there is not enough remain-
ing battery capacity. Please connect the AC adaptor to charge the battery.
When using the AC adaptor, charging occurs automatically unless the battery is already full.
Turning the power off
Slide the power button down and hold it for two seconds or longer.
The shutdown screen will appear, and several seconds later the power
will turn off automatically.
Auto shutdown function
After you've stopped the recorder and a certain length of time
elapses without any operations being performed, the shutdown
screen will appear automatically and then the power will turn off
several seconds later (
→p.27).
MR1_Text1_E.p65 06.11.22, 11:59 AM 12