KORG MR-1 - Manual (Page 50)

50
Disk too busy.
• Repeated actions of recording, writing, and deleting will gradually decrease the amount of
contiguous free space on the hard disk, causing files to be saved in a fragmented state
during recording. This message will appear when access to the drive has slowed down due
to such problems.
→ Back up your important files, format the hard disk, and then restore your files back
onto the hard disk.
Alternatively, delete unneeded files to increase the amount of free space, and then
connect the MR-1 to your computer in USB mode and optimize the drive. It is effective
to use software of a type that optimizes the free space.
Drive Error.
• An error occurred while accessing the drive.
→ Use USB mode to connect the MR-1 to your computer and execute the Check Drive
command.
If this error message appears even after you've executed Check Drive, format the drive.
Drive Full.
• There is insufficient remaining capacity on the drive.
→ Delete unneeded projects/files.
Failed to write System File.
• The system update has failed.
→ It is possible that the MR-1 has malfunctioned. Please contact customer service.
Memory Full.
• You attempted to register more than 100 marks. No further marks can be registered.
→ Delete unneeded marks before registering other marks.
Not supported file.
• This file format is not supported.
→ Check the file formats that are supported.
Please enter name.
• There is no project name (the name consists only of spaces).
→ Please enter a valid project name (one or more alphabetical character, numeral, or
symbol).
Protected Project.
• The operation cannot be executed because the project is protected.
→ Turn off the project protect setting.
MR1_Text4_E.p65 06.11.22, 0:02 PM 50