Updating the system (load system) – KORG MR-1 User Manual
Page 40
40
Updating the system (Load System)
You can download the latest version of the MR-1 operating system file from the Korg website
ocedure, refer to the Korg website.
Preparing for the update
Use a USB cable to connect the MR-1 to your computer (see "Using the MR-1 with your
computer," p.42), and copy the downloaded system file to the root folder of MR-1's hard
disk.
Update procedure
We recommend that you use the AC adaptor as the power supply when loading the system.
If a power failure or similar accident occurs while loading the system, the MR-1 may become
inoperable. If this occurs, please contact Korg customer service.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to se-
lect and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm "Load System."
3. A dialog message of "Load System : Are you sure?" will appear in the screen.
Push
Push
Push
4. Use the P-dial to select and confirm [Yes].
The screen will indicate "Load System: Working..." and the system will be loaded.
5. When the system has finished loading, the display will indicate "System will shut
down. [OK]"
6. Press the P-dial (or press the menu button); the MR-1 will shut down and the power
will turn off.
7. Slide the power button to turn on the power; the MR-1 will start up with the newly
loaded system.
If the update fails, a message will appear. Make a note of the contents, and take the appropriate
action (
MR1_Text3_E.p65
06.11.22, 0:01 PM
40