KORG MR-1 - Manual (Page 8)

8
9. Power button (with Hold function)
This turns the power on/off (shutdown). By sliding this button to the HOLD position, you
can prevent accidental operation from occurring when you inadvertently touch the buttons
or the P-dial.
10. Menu button
This button accesses the menu list (MENU) screen, allowing you to choose the information
or parameters that will be displayed. Each time you press this, you will alternate between
the level meter screen and the menu screen. You can also use this button to return from an
editing screen to the previous screen.
11. P-dial
This is a dial with a push-switch function. For more about how to operate it, refer to "Screens
and operations" on the next page.
12. Volume buttons
These adjust the volume of the headphone jack.
Top panel
13
15 16 14
13. Headphone jack (stereo mini)
You can connect a set of headphones here.
14. Output jack (stereo mini)
The audio is sent out from this jack.
15. Mic power switch
This switch supplies power (+3V) when using a plug-in power type mic. Turn this on if
you're using the included mic (CM-2M).
You must leave this off if you've connected a line input or a dynamic type mic. Leaving this
switch on could damage your mic or line input device.
16. Input switch / Input jacks L, R
Select either the MIC (mic input) or LINE (line input) position as appropriate for the device
that's connected to input jacks L and R.
You can use either balanced or unbalanced devices (
→p.15).
MR1_Text1_E.p65 06.11.22, 11:59 AM 8