KORG MR-1 - Manual (Page 39)

39
Formatting the hard disk (Format)
Here's how to format the MR-1's hard disk.
You should only perform this operation if you want to erase all of the data saved on the hard
disk, or if the message "Drive Error." appears frequently.
All data will be erased from the hard disk when you execute this operation, so you should use
it with caution.
Before executing this operation, you should make a backup of any data you want to keep.
(
→p.42 "Using the MR-1 with your computer")
If a power failure or similar accident occurs during formatting, the MR-1 may become inoperable.
If this occurs, please contact Korg customer service.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm "Format."
3. A dialog message of "HDD Format : Are you sure?" will appear in the screen.
Push
Push
Push
3 seconds
or longer.
4. Use the P-dial to select [Yes], and continue holding it for three seconds or longer.
If you decide not to format the hard disk, use the P-dial to select and confirm [No] (or press
the menu button); you will return to the system setting (SYSTEM) screen.
5. The screen will indicate "Working...", and when formatting is finished the indication
will change to "Complete."
6. Press the P-dial (or press the menu button) to return to the system setting (SYSTEM)
screen.
MR1_Text3_E.p65 06.11.22, 0:01 PM 39