KORG MR-1 - Manual (Page 16)

16
Recording using the line inputs
Set the input switch to LINE. If the level is too low even after you've adjusted the gain
(
→p.16), set the input switch to MIC.
Selecting the recording format
Here's how to select the recording format. Each time you record, a new project will be created
in the recording format you've selected.
The default setting is WAV 16-bit 44.1 kHz.
1. Press the menu button, and in the menu list, use the P-dial to select and confirm
"REC MODE."
The record mode (REC MODE) setting screen will appear.
Push
Turn
Recording mode screen Selection icon
2. Use the P-dial to select and confirm the Project Type.
A check mark will appear in the check box for the project type you selected and confirmed.
You can choose from WAV (BWF), DFF, DSF, and WSD. For details on each type, refer to
"Project recording format" (p.36).
3. If you checked WAV (BSF), use the P-dial to select and confirm the desired Wav For-
mat: fs/bit setting (bit depth and sampling frequency).
Turn
If you've selected WAV
4. When you've finished setting the recording mode, press the menu button to return to
the menu list screen, and then press the menu button once again to return to the level
meter screen.
Manually adjusting the recording level
Here's how to adjust the recording level with the Gain Control mode/Input Gain set to Manual.
When the MR-1 is shipped from the factory, the Input Gain is set to Manual. If you want to use
the Auto function (Gain Control mode set to Auto) and adjust the Auto gain settings, refer to
"Changing the Auto recording level settings" (p.19).
1. Press the record button to enter record-ready mode.
The record LED will blink slowly.
MR1_Text1_E.p65 06.11.22, 0:00 PM 16