KORG MR-1 - Manual (Page 41)

41
DSD output filter settings (DSD Filter)
When playing back a 1-bit project/file, you can select one of three types of signal processing
filter that will be used.
By default, the standard Type 1 filter is used.
Type 1 : -3.0 dB @ 50 kHz (standard), -18.0 dB @ 100 kHz
Type 2 : -3.0 dB @ 70 kHz, -9.8 dB @ 100 kHz
Type 3 : -3.0 dB @ 60 kHz, -17.0 dB @ 100 kHz
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select
and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm "DSD Filter."
The selection icon will change from " " to " ", and the value of the setting will be high-
lighted.
Push
Push Push
3. Turn the P-dial to select the desired filter type, and then press the P-dial (or press the
menu button) to complete the setting.
The selection icon will change from " " to " ".
MR1_Text3_E.p65 06.11.22, 0:01 PM 41