Kathrein UFS 700sw - Manual (Page 46)

46
RECORD WEEKLY
Use the

buttons to select the recording mode “weekly” (see screenshot below).
Use the

buttons to switch to the selection fi eld “Start” and use the

buttons or the numeric
pad to select the desired recording starting time.
Use the

buttons to switch to the selection fi eld “End” and use the

buttons or the numeric
pad to select the desired recording ending time.
When all settings have been made, press the button to save the recording settings. You can view the
recording in the Timer List view of the EPG (see item “Plan recording”).
Remember that the day of the week for the desired programme is loaded in
the recording schedule and you can make no further manual corrections to it!
Therefore before pressing the

(red dot) button, select the programme on the
day of the week that in future you will wish to make the weekly recording.
RECORD USER-DEFINED
Use the

buttons to select the recording mode “user-defi ned” (see screenshot on next page).
Use the

buttons to switch to the selection fi eld “Day” and use the

buttons to enter the desired
recording day. Press the button to fi x the selection (the day will be shown in red letters). If necessary the
receiver will suggest some days to you; you can accept these suggestions or deactivate them again using
the cursor buttons and pressing the button once.
Use the

buttons to switch to the selection fi eld “Start” and use the

buttons or the numeric
pad to select the desired recording starting time.
EPG - ELECTRONIC PROGRAMME GUIDE