Kathrein UFS 700sw - Manual (Page 69)

69
SERVICE MENU
Select the “Service” menu using the menu button

, the

buttons on the main menu and .
The following display appears:
Current software version
Last update run
UPDATE SOFTWARE
Hardware version
Date of the channel list
Use the

buttons to select from the displayed options and press to confi rm your selection:
• “Load in standby”: When the receiver is switched to standby mode the new software is loaded
• “Remind later”: The message reappears the next time the receiver is started up
• “Don’t load”: The software is not loaded and the download must be launched manually.
To load the software manually:
Use the

buttons to switch to “Software Update” and then press . The following display appears
(next page):
The receiver checks in standby mode whether a new software version is available and, if it is, displays the
following message the next time the receiver is started up: