Kathrein UFS 700sw - Manual (Page 70)

70
SERVICE MENU
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Update Software
If new software is available (but only then), use the

buttons (No/Yes) to select whether you wish
to load the new software that is available. If you are unsure whether you wish to load the new software,
you can initially set the reply to “No”. If you do agree to the changes, you can then proceed to download
the software.
Channel List
Select the required activity using the

buttons. Available options:
- “only update”: Your existing list will only be updated, any new channels found will be added at the
end of the channel list. The sort sequence of your channel list remains unchanged; the only change
is that the channel data (transmission frequency etc.) are updated.
- “no download”: Your existing list will not be edited (nor updated nor overwritten).
- “overwrite”: Your existing channel list will be completely superseded by a new list of available
channels. Your personal channel sorting will be lost. If you select “overwrite”, you will additionally
see displayed the line “pre-sorted for”. Use the

buttons to switch to this line and use
the

buttons to select the desired pre-sorting. Your available options are for instance Germany
and Austria.