Kathrein UFS 700sw - Manual (Page 61)

61
Press the

button to move to the next selection item.
Transponder Frequency
Use the

buttons or the numeric keypad to select the transponder frequency on which the
channel being sought is transmitted. At the bottom right of the screen display, the receiver shows the
current signal strength and signal quality of the selected transponder.
Press the

button to move to the next selection item.
Service ID
Using the

buttons or the numeric keypad, enter here the service ID of the channel being sought.
When you have made your settings, use the

buttons to select “Start Search” and press the button
to start the search. You can cancel the search at any time by pressing the

button.
During the search you will see a display that shows you the progress of the search.
After completion of the search, you will see the following message (example):
Press the button. You will be asked whether you wish to save the changes or not. Selection is performed
using the

buttons and is confi rmed using the button. If you select “Yes, save changes”, the newly
found channels will be added to the end of the channel list. Then press the

button to exit the menu.
The channel list is called up on to the TV screen by pressing the button (see also section “On-screen
displays” “Channel list TV/Radio”).
SEARCH CHANNELS (CHANNEL SEARCH)