Kathrein UFS 700sw - Manual (Page 66)

66
Here you can use the

buttons to select the type of video signal at the VCR Scart socket. Select
the signal that your external recorder can process. When doing this, refer to the operating instructions
for your recorder!
• CVBS – Composite colour baseband signal
(colour/picture/blanking/synchronization signal)
• Y/C – S-Video signal (luminance/chrominance)
VCR-SCART-OUTPUT
Here, you can use the

buttons to specify whether your TV set is a
• PAL or
• NTSC set.
Here you can use the

buttons to select whether the receiver should automatically output the
Dolby Digital signal (if this is transmitted).
AUTO DOLBY DIGITAL OUTPUT
TELEVISION SYSTEM
Here you can use the

buttons to set a delay in milliseconds, if the sound output from your receiver
is out of synch with the TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from
10 ms up to 200 ms.
AUDIO DELAY
SETTINGS
CUSTOMIZE SCREEN MENU