Kathrein UFS 700sw - Manual (Page 13)

13
FIRST INSTALLATION: General
Before using your unit for the fi rst time, read the “Safety Instructions” and
“Connection and Setup” sections.
The “Connection examples” section provides a sample confi guration.
Do not connect the unit to the power supply until all installation work has been
properly carried out.
The guidance given in the “First Installation” section assumes that the receiver
has been properly connected, as per the “Safety Instructions” and “Connection
and Set-Up” sections.
First switch your TV set on and select the AV channel slot. Switch on your receiver at the power switch at
the front of the unit. The following display appears:
Select the menu language you want using the

buttons. Available options: German, English, French,
Italian, Spanish, Czech, Dutch and Turkish.
Press the
!
(green) button to move to the next menu.
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Note: If you are unsure whether you chose the right option from a previous menu, you can go
back a step at any time during the First Installation process by pressing the (red) button.
The following display appears: