Kathrein UFS 700sw - Manual (Page 62)

62
PARENTAL CONTROL
Select the “Parental control” menu using the menu button

, the

buttons on the main menu
and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the
PIN using the numeric keypad you are shown the following display:
Select the parameters to be changed using the

buttons.
LOCK MAINMENU
Use the

buttons (On/Off) to select whether the main menu should be locked. If the menu is locked,
changes can be made only by entering the four-digit PIN code.
LOCK SET-TOP-BOX
Use the

buttons (On/Off) to select whether the receiver should be locked. If the receiver is locked,
it can be operated only by entering the four-digit PIN code after it is switched on (factory setting: 0000).
Also pay attention to the
bars at the bottom of the on-
screen display! These provide
information on what to do next.
Press the

button to exit the menu.