Lanier 5622 AG - Manual (Page 23)

Basics
10
1
Turning On the Power
AAAA
Press the operation switch to
make the On indicator go on.
The display panel will come on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
❒ The machine will be ready for
use within 10 seconds of being
turned on.
❒ If the user code dialog box ap-
pears on the display panel in-
stead of the copier display,
enter a registered user code, and
then click the [#] key. See p.86
“User Code”.
Turning Off the Power
AAAA
Make sure that the exposure glass
or the document feeder is in the
right position.
BBBB
Press the operation switch to
make the On indicator go off.
Note
❒ Even if you press the operation
switch, the indicator does not
go off and blinks in the follow-
ing cases:
• When the exposure glass or
the document feeder is open
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment
• When the hard disk is oper-
ating
ZFFH120N
ZFFH120N
RussianC2-EN-sysF1_V4_FM.book Page 10 Thursday, August 23, 2001 11:34 AM