Lanier 5622 AG - Manual (Page 40)

Copy Mode
27
2
DDDD
Press the
{{{{Interrupt}}}} key again.
The machine resumes the printing
job of the received fax document.
Resuming the interrupted
copying job
A A A A Reset the previous original.
B B B B Press the {{{{Start}}}} key.
The machine resumes the inter-
rupted copy run.
Copying and Multi-accessing
If you want to make copy while using
another function, follow the proce-
dure below.
AAAA
Press the
{{{{Interrupt}}}} key.
The interrupt display appears on
the panel display.
BBBB
Place originals, and then press the
{{{{Start}}}} key.
The machine interrupts the job that
is printing and starts copying your
originals.
CCCC
When copying is complete, re-
move your originals and the cop-
ies.
DDDD
Press the
{{{{Interrupt}}}} key again.
The previous job settings will be
restored and the machine will con-
tinue from where it left off.
Note
❒ Machine operations are different
depending on the“Print Priori-
ty”settings (
⇒ p.68 “General
Features 1 /
2
”) or the “User Code
Management” ( ⇒ p.68 “General
Features 1 /
2
”) settings.
Reference
⇒ p.35 “Multi-Access”
❖ ❖ ❖ ❖ When “Print Priority” = “Fax”,
“Printer”, or “Display” (default)
The machine completes the op-
eration of the function set by
Print priority before performing
the operation of another func-
tion.
Limitation
❒ While the machine is per-
forming two-sided printing
in fax m ode, you cannot
make two-sided copies until
the printing ends.
❖ ❖ ❖ ❖ When “Print Priority” = “Inter-
leave”
The machine performs the oper-
ations in the order in which they
are initiated. If another function
is initiated during operation,
the machine completes the cur-
rent operation before perform-
ing the operation of the function
initiated.
RussianC2-EN-sysF1_V4_FM.book Page 27 Thursday, August 23, 2001 11:34 AM