Lanier 5622 AG - Manual (Page 29)

Basics
16
1
C C C C Use the number keys to enter the IP address.
Note
❒ Press the [← ← ← ←] and [→ → → →] keys to move to the next entry field.
❒ If you enter the wrong IP address, press [Clear] and re-enter the IP ad-
dress.
D D D D Press [OK].
E E E E Make the [Sub-net Mask], [Gateway Address], [Access Control], and [Access
Mask] settings. For each item, click the corresponding button on the
screen shown in step
B B B B, and then perform the same procedure as de-
scribed in steps C C C C and D D D D.
Acquiring the IP Address from the DHCP Server
To use the DHCP server to acquire the IP address, select [DHCP] from [Network
Boot]
.
Note
❒ You need to change the settings when you use DHCP.
❒ To always assign the same IP address to the machine, reserve the IP ad-
dress for the machine on the DHCP server.
❒ Use the default IP address.
A A A A Make sure that the [Network] key is selected.
B B B B Press [Network Boot].
RussianC2-EN-sysF1_V4_FM.book Page 16 Thursday, August 23, 2001 11:34 AM