Lanier 5622 AG - Manual (Page 74)

61
4. User Tools (System Settings)
Accessing the User Tools (System Settings)
This section is for the key operators in
charge of this machine. You can
change or set the machine's default
settings.
Preparation
After using the User Tools, be sure
to exit from the User Tools.
The selected key is highlighted.
Any changes you make with the
User Tools remain in effect even if
the main power switch or opera-
tion switch is turned off, or the
{{{{Energy Saver}}}} key is pressed.
Reference
For information on the User Tools
(Copy/Document Server Fea-
tures), see the Copy Reference
manual.
Changing the Settings
AAAA
Press the
{{{{User Tools/Counter}}}} key.
The User Tools Main Menu ap-
pears.
BBBB
Press the [System Settings] key.
The System Settings menu ap-
pears.
CCCC
Select the desired menu and press
the desired key.
DDDD
Change the settings by following
the instructions on the display
panel. Then press the [OK] key.
Note
❒ [OK]: Press to set the new set-
tings and return to the previous
menu.
❒ [Cancel]: Press to return to the
previous menu without chang-
ing any data.
❒ To cancel the changes made to
settings and return to normal
the function display, press the
{{{{User Tools/Counter}}}} key.
ZFFH150N
RussianC2-EN-sysF1_V4_FM.book Page 61 Thursday, August 23, 2001 11:34 AM