Installing the operator information panel assembly, Installing, Operator – Lenovo RD210 User Manual
Page 126: Information, Panel, Assembly
6.
From
the
front
of
the
server,
carefully
pull
the
assembly
out
of
the
server
while
you
move
it
slightly
from
side
to
side.
7.
If
you
are
instructed
to
return
the
operator
information
panel
assembly,
follow
all
packaging
instructions,
and
use
any
packaging
materials
for
shipping
that
are
supplied
to
you.
Installing
the
operator
information
panel
assembly
To
install
the
operator
information
panel,
complete
the
following
steps.
1.
Read
the
safety
information
in
and
2.
From
the
front
of
the
server,
slide
the
operator
information
panel
into
the
server
until
it
clicks
into
place.
3.
Inside
the
server,
connect
the
cable
to
the
rear
of
the
operator
information
panel
1
assembly.
The
following
illustration
shows
the
cable
routing
for
the
operator
information
panel:
Note:
The
operation
information
panel
cable
should
go
in
between
the
Video/USB
cable
(on
the
bottom)
and
the
CD/DVD
cable
(on
the
top)
when
all
three
cables
are
installed
in
the
server.
110
ThinkServer
RD210
Types
3795,
3796,
3818,
and
3819:
Installation
and
User
Guide