Lanier 5484 - Manual (Page 119)

Combine
105
2
❒ The default setting is “Top to Top”. You can change this setting with the
copy User Tools. See
⇒
P.312 “General Features”.
To select “Top to Bottom”
A Press the
[Orientation] key.
B Press the
[Top to Bottom] key then press the [OK] key.
F
Select the paper.
G
Set your originals then press the { Start } key.
2 Sided 2 Pages
→
Combine 1 Side
Copies two 2-sided originals to one side of a sheet.
Note
❒ You can change the order that the copy is printed in Combine mode. See ⇒
P.318 “Adjust Image”.