Lanier 5484 - Manual (Page 260)

Connect Copy (Option)
246
4
Using Connect Copy
You can select Connect Copy mode from either of the two connected machines
by pressing the
[Connect] key. The machine you use becomes the master unit,
and the other machine the sub-unit.
Limitation
❒ Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.
A
Make sure the machine is in copy mode.
Note
❒ If user codes are turned on, enter a user code programmed in the master
unit with the number keys (up to 8 digits) then press the [#] key. You don't
need to enter the user code for the sub-unit.
Reference
See
⇒
P.70 “User Codes”.
B
Press the [Connect] key on the machine that is to be the master unit.
When the key darkens, the two machines are connected.
❖ Master unit display