Lanier 5484 - Manual (Page 256)

Connect Copy (Option)
242
4
Functions Not Available with Connect Copy
The following functions are not available in Connect Copy mode:
• Job Preset
Interrupt Functions
• You cannot use Connect Copy when a job has been paused using the Inter-
rupt function.
• You can use the Interrupt function on the sub-unit while in Connect Copy
mode, but only when the master unit is not scanning originals.
• You cannot use other functions in Connect Copy mode no matter how the
“Output Priority” of the User Tools (System Settings) is programmed.
• You cannot switch to other functions while in Connect Copy mode. To access
other functions you must exit Connect Copy mode.
• While you use other functions, you cannot use Connect Copy mode.
Before You Start
Both machines must have paper trays loaded with paper of the same size, direc-
tion and type that you wish to copy onto.
To make the most out of the Connect Copy feature, we recommend that :
• The paper tray settings of the master unit and sub-unit should match each
other.
• The “Original Mode Level”of the User Tools (Copier/Document Server Fea-
tures) settings should be the same on each unit. If they are not the same, the
copied images may differ. See
⇒
P.314 “Original Mode Level”
• The User Stamp settings should be the same on each unit. If they are not the
same, the copied images may differ. See “Program/Delete Stamp” .
⇒
P.174
“Program/Delete User Stamp”