Control panel – Lanier 5484 User Manual
Page 21
7
Control Panel
1.
Status indicator
2.
{
Screen Contrast
} knob
Adjusts the brightness of the display pan-
el.
3.
{
Language Selection
} key
Press to change the display language.
4.
{
Interrupt
} key
Press to make interrupt copies during a
copy run. See
⇒
P.68 “Interrupt Copy”.
5.
{
Energy Saver
} key
Press to switch to and from Energy Saver
mode. See
⇒
P.68 “Energy Saver Mode”.
6.
{
Clear Modes
} key
Press to clear any previously entered
copy job settings.
7.
{
Program
} key
Press to register or recall a program. See
⇒
P.55 “Programs”.
8.
{
Stop
} key
Press to stop a copy job in progress.
9.
{
Start
} key
Press to start copying. If pressed just after
the machine is turned on, the job will
start after the warm-up period. See
⇒
P.70 “Auto Start”.
10.
{
Sample Copy
} key
Use this key to make a single sample
copy set before starting a long copy run.
Color
Status
Off
Ready to make
copies
Flashing green
Scanning originals
Lit green
Copying (You can
scan originals.)
Flashing red
Toner has nearly
run out