Lanier 5484 - Manual (Page 50)

Copying
36
2
B Press the
[Lighter] or [Darker] key to adjust the density.
Note
❒ If you do not wish to set any other functions press the { Start } key to start
copying.
Choosing the Original Type
The Original Type setting gives you control over the method used to make cop-
ies. Choose a type that best matches your original.
The following Original Type settings are available:
❖ Text
Select this mode when your originals contain only letters (no pictures).
❖ Photo
Delicate tones of photographs and pictures can be reproduced with this
mode.
❖ Auto Text/Photo
Select Auto Text/Photo when your originals contains photographs or pic-
tures with letters.
❖ Pale
Select this mode for originals that have lighter lines written in pencil, or for
carbon copies. The faint lines will be clearly copied.
❖ Generation
If your originals are copies (generation copies), the copy image will be repro-
duced sharply and clearly.
Note
❒ You can adjust the quality level for each original type. See “Original Mode
Level”
⇒
P.314 “Original Mode Level”.
❒ You can have the Original Type keys displayed on the initial copy display.
See “Original Mode Display”
⇒
P.316 “Display/Panel Tone”.
❒ Make adjustments to the original type on the master unit.