Lanier 5484 - Manual (Page 136)

Copying
122
2
C
Press the [Book
→
2 Sided] key.
D
Check the orientation.
Note
❒ To change the copy orientation to “Top to Bottom”, press the [Orientation]
key, then press the [Top to Bottom] key. If you do not, go to step
F.
❒ The default setting is “Top to Top”. You can change this setting with the
copy User Tools. See
⇒
P.312 “General Features”.
To select “Top to Bottom”
A Press the
[Orientation] key.
B Press the
[Top to Bottom] key then press the [OK] key.
E
Set the book on the exposure glass, then press the { Start } key.