Lanier 5484 User Manual

Page 262

Advertising
background image

Connect Copy (Option)

248

4

D

Make any settings you require on the master unit.

Note

❒ Any copy settings that were set up before you entered Connect Copy mode

will still remain in effect. The Punch function requires the optional Punch
kit to be installed on both the master and sub-unit.

❒ To exit Connect Copy mode, press the

[Connect]

key on the master unit

again.

E

Enter the number of copies you require with the number keys.

Note

❒ You can enter up to 9999 copies.
❒ If you make a mistake, press the {

Clear

} key and enter a new number.

❒ Even though Connect Copy is selected, only the master unit will make cop-

ies in the following situations :
• When making a single copy set.
• When the original is a single sheet and you enter a low number of cop-

ies/sets.

F

Press the {

Start

} key on the master unit.

Copying starts after the original has been scanned.

Note

❒ If you have set your originals in the document feeder (ARDF), copying

starts simultaneously in the master unit and sub-unit after all originals
have been scanned.

❒ When using the Batch /SADF mode, set your originals and press the

{

Start

} key. After all the previously set originals are scanned in, set the next

originals while the Auto Feed indicator is lit. When all pages have been
scanned in, press the {

#

} key. Copying starts simultaneously in the master

unit and sub-unit. See “Batch SADF mode”.

P.32 “Batch/SADF Mode”

Advertising
This manual is related to the following products: