Lanier 5484 - Manual (Page 316)

What to do if Something Goes Wrong
302
5
e Removing Jammed Staples
Note
❒ Staples might be jammed because of curled copies. In this case, try turning the
copy paper over in the tray. If there is no improvement, change to copy paper
with less curl.
❒ After removing jammed staples, staples might not be ejected the first few
times you try to use the stapler.
• 1: Open the front cover of the finisher
and pull lever R9 down.
• 2: Pull lever R8 and fully pull out the
staple unit.
• 3: Turn knob R9 until the marks are
aligned.
• 4: Pull out the staple unit lever.
• 5: Pull out the staple unit gently.