Lanier 5484 - Manual (Page 269)

Relationship between Master Unit and Sub-Unit Copier/Document Server Features
255
4
Relationship between Master Unit and
Sub-Unit Copier/Document Server
Features
This section describes which Copier Feature settings are used by the master unit
and sub-unit in Connect Copy mode.
Note
❒ In Connect Copy mode the { User Tools } key on the sub-unit is disabled. To ac-
cess to the User Tools on the sub-unit, you need to exit Connect Copy mode
first.
Reference
See
⇒
P.312 “Settings You Can Change with the User Tools”.
Symbol Meaning
✩ The master unit and sub-unit use each setting
←
Both units use the master unit setting
— Unrelated
Menu Master
unit Sub-unit Remarks
General Features
Auto Paper Select Priority ✩ — Trays with the same size and
direction of paper will be se-
lected from the master unit
and sub-unit automatically.
Auto Image Density Select
Priority ✩ —
Original Mode Priority ✩ —
Duplex Mode Priority ✩ —
Copy Orientation in Duplex
Mode ✩ —
Original Orientation In Du-
plex Mode ✩ —
Initial Mode Set ✩ —
Maximum Copy Quantity ✩ —
Copy Reset Timer ✩ — Connect Copy will be can-
celled according to the timer
on the master.