Lanier 5470 - Manual (Page 112)

Presetting the Next Copy Job
6 - 2 Special Copier Functions
Presetting the Next Copy Job
1
Press the Copy New Job key while the current
copy job is running. The message “Please set
modes and press the start key”, is displayed in the
Message Display.
2
Select the next copy job settings.
3
Set the originals in the Document Feeder.
4
Press the Return to menu in
printing key.
•
After the current copy job,
the next copy jobs
automatically begins.
•
You can switch the display to
the current copy job by
pressing the Return to menu
in printing or Return to menu
in scanning key.
•
You can switch the display to the preset copy job by pressing the Return to
menu in setting new job key.
After the first copying job has been scanned, you can set up the next copy job while the first job
is copying. The maximum number of copy jobs that can be preset at one time is eight.