Screen contrast, Original beeper, Screen contrast -20 – Lanier 5470 User Manual
Page 130: Original beeper -20, Screen contrast 1
Screen Contrast
6 - 20
Special Copier Functions
Screen Contrast
1
Adjust the brightness of the LCD panel using the
Display Adjust Knob.
2
Rotate the knob clockwise to lighten the display.
Rotate the knob counter clockwise to darken the
display.
Original Beeper
The copy control panel uses a LCD to display the functions and operations or the copier.
Condition under which the copier is placed, may make it necessary for you to adjust the contrast
of the LCD panel.
About two seconds after the copy job is done, a beeper beeps twice and an error message is
displayed when you leave your originals on the Exposure Glass.
You can adjust when the beeper sounds using the Auto Response Sensor setting.
•
If set to YES the beeper sounds as soon as you leave the copier after copying.
•
If set to NO, the beeper sounds two seconds after copying.
•
You can also cancel this feature. See “System Setting - Basic Page 1” on page