Lanier 5470 - Manual (Page 73)

Overhead Transparencies and Thick Paper
Copying Methods 4 - 27
Overhead Transparencies and Thick Paper
1
If Duplex mode is selected, touch the Duplex key to turn it OFF.
2
Place the original on the Document Feed Tray or on the Exposure Glass.
3
Open the Bypass Paper Tray.
4
Adjust the Bypass Paper Guides to the width of the
transparencies.
•
Be sure to place the transparencies in the same
direction as your original.
5
Insert the OHP transparency or thick paper face up
until the beep sounds.
6
Press the (#) key on the keypad.
7
Select OHP or Thick Paper by
touching the appropriate key.
8
Touch the OK key.
9
With the originals set, press the
Start key.
To make copies on OHP transparencies or thick paper, you need to specify the paper type. This
function is not available in Duplex mode.