Lanier 5470 - Manual (Page 53)

Bypass Copying
Copying Methods 4 - 7
3
Touch the Non Standard key.
4
Touch the Vert key.
5
Enter the vertical size of the
paper using the keypad.
6
Press the (#) key to enter this
value.
7
Touch the Horz key.
8
Enter the horizontal size of the paper using the keypad.
9
Press the (#) key to enter this value.
10
To register the non-standard size
entered, touch the Store key.
Note: Only one non-
standard value can be
entered.
11
Touch the OK key.
12
Set the originals in place, then press the Start key.