Lanier 5470 - Manual (Page 116)

Storing Copy Settings In Memory
6 - 6 Special Copier Functions
Storing Copy Settings In Memory
Storing Your Settings
1
Edit the copy settings so that all of the function you want to store in this program are
selected.
2
Press the Program key.
3
Touch the Store key.
4
Touch the Program Number you
want to store these copy settings
to.
•
If the Program Number has
programmed setting in it, the
Program-In symbol appears
in front of the Program
Number.
•
You will be asked if you wish to overwrite it. Touch either Yes or No.
5
Enter the program name using
the letter keys.
•
Up to 25 character can be
used.
•
If no program name is
desired, proceed to Step 6.
6
Touch the OK key.
All of the functions such as copy quantity, percent reduction, copy darkness, margin shift, etc.,
for frequently used copy jobs can be stored in Memory Copy.
•
Recall these copy job settings in the future with the press of a button.
•
Store up to ten copy jobs in the copiers memory.