Lanier 5470 - Manual (Page 113)

Presetting the Next Copy Job
Special Copier Functions 6 - 3
Edit Preset Copy Job
1
Press the Job List key.
2
Press the preset job you want to
edit.
Note: If the desired job is
not shown and more than 5
jobs are preset, press the 5-8
key to display the desired
job.
3
Touch the Check Modes/Change
key.
4
Make changes to the settings.
5
Touch the Return to job status
menu key.
6
Touch the Yes key.
7
If you want to change the settings for other preset copy jobs, repeat 2 to 6.
8
Touch the Return to menu in printing key.