Lanier 5470 - Manual (Page 43)

Margin Adjustment
Copier Functions 3 - 23
Margin Adjustment
1
Touch the Edit/Stamp key.
2
Touch the Margin Adj. key.
3
Touch the left and right arrow
keys to set the left and right
margins for the front and back
side of the page.
•
Each touch of the arrow key
changes the value by 0.1
inch.
4
Touch the up and down arrows
to set the top and bottom margins for the front and back side of the page.
•
Each touch of the arrow key changes the value by 0.1 inch.
5
When your settings are complete, touch the OK key.
6
Touch the OK key.
7
Set your originals, then press the Start key.
You can shift the image on the page either left or right to make a binding margin.
The default setting is:
•
Front 0.2” left
•
Back 0.2” Right
You can change the default setting.