Lanier 5470 - Manual (Page 90)

System Settings
5 - 6 User Tools
System Setting - Paper Size Setting
Key Operator Code for Off
Setting
Set a Key Operator Code (up to 8 digits) to
temporarily cancel the power off setting of
the weekly timer.
When the weekly timers are set and the
Operation Key is OFF, you can still use the
copier by doing one of the following:
•
If the Key Operator Code is
set, turn ON the Operation
Switch and enter the code.
•
If the Key Operator Code is
not set, just turn ON the
Operator Key.
The copier must be plugged in and the Main
Power Switch must be turned ON.
When the power is OFF due to the
activation of the Weekly Timer, you can
temporarily cancel the power off state by
entering the Key Operator Code.
Menu Description
Paper Tray Priority Select the paper tray which will be selected
as a default.
Default:
Machine with LCC: LCC
Machine without LCC: Tray 1
Tray 1: Paper Size Setting
Tray 2: Paper Size Setting
Tray 3: Paper Size Setting
Select the size of copy paper set in the
Paper Tray.
•
Paper Tray 2, the setting of the
paper size selector has priority
•
If the specified paper size
differs from the size of paper
actually set in the Paper Tray,
a paper misfeed might occur
because the paper size is not
detected correctly.
•
To set a paper size for the LCT
(Large Capacity Tray), contact
your Lanier Service
Representative.
Menu Description