Chapter, Configuration using the web-based utility, Snmp > notification filter – Linksys SLM248G4S (G5) User Manual

Page 47: Snmp > notification recipient

Advertising
background image

Chapter 

Configuration Using the Web-based Utility

41

24/48-Port 10/100 + 4-Port Ggabt Reslent Clusterng Smart Swtch wth 2 Combo SFPs

Base Table

Management Staton

Displays the management station

IP address for which the basic SNMP community is defined.

Communty Strng

Displays the password used to

authenticate the management station to the device.

Access Mode

Displays the access rights of the

community.

Vew Name

Displays the user-defined SNMP view.

Advanced Table

Management Staton

Displays the management station

IP address for which the basic SNMP community is

defined.

Communty Strng

Displays the password used to

authenticate the management station to the device.

Group Name

Displays advanced SNMP communities

group name.

SNMP > Notification Filter

The Notification Filter screen permits filtering traps based

on OIDs. Each OID is linked to a device feature or a feature

aspect. The Notification Filter screen also allows network

managers to filter notifications.

SNMP > Notification Filter

Flter Name

Contains a list of user-defined notification

filters.

New Object Identfer Subtree

Displays the OID for

which notifications are sent or blocked. If a filter is

attached to an OID, traps or informs are generated and

sent to the trap recipients. Object IDs are selected from

either the Select from List or the Object ID List. There are

two configuration options:

Select from Lst

Select the OID from the list provided.

Object ID

Enter an OID not offered in the Select from

List option.

Flter Type

Indicates whether informs or traps are sent

regarding the OID to the trap recipients.

Excluded

Restricts sending OID traps or informs.

Included

Sends OID traps or informs.

Click Add to Lst to add the Notification Filter configuration

to the Notification Filter Table at the bottom of the screen.

SNMP > Notification Recipient

The Notification Recipient screen contains information for

defining filters that determine whether traps are sent to

specific users, and the trap type sent. SNMP notification

filters provide the following services:

Identifying Management Trap Targets
Trap Filtering
Selecting Trap Generation Parameters
Providing Access Control Checks

SNMP > Notification Recipient

Recpent IP

Indicates the IP address to whom the traps

are sent.

Notfcaton Type

Defines the notification sent. The

possible field values are:

Traps

Indicates traps are sent.

Informs

Indicates informs are sent.

SNMPv1,2

Enables SNMPv1,2 as the Notification

Recipient. Either SNMPv1,2 or SNMPv3 can be enabled at

any one time, but not both at the same time. If SNMPv1,2

is enabled, the Community String and Notification Version

fields are enabled for configuration:

Communty Strng

Identifies the community string of

the trap manager.

Notfcaton Verson

Determines the trap type. The

possible field values are:

SNMP V1

Indicates SNMP Version 1 traps are sent.

SNMP V2

Indicates SNMP Version 2 traps are sent.

Advertising
This manual is related to the following products: