Linksys SLM248G4S (G5) - Manual (Page 51)

Chapter  Configuration Using the Web-based Utility
4 24/48-Port 10/100 + 4-Port Ggabt Reslent Clusterng Smart Swtch wth 2 Combo SFPs
Admin > Cable Test - Gigabit Ports
Advanced (Ggabt ports only) Click the Advanced
button to open the Copper Cable Extended Feature screen.
The Copper Cable Extended Feature screen contains the
following fields.
Cable Status Displays the cable status.
Speed Indicates the speed at which the cable is
transmitting packets.
Lnk Status Displays the current link status.
Par The pair of cables under test.
Dstance to Fault Indicates the distance between the
port and where the cable error occurred.
Status Displays the cable status.
Cable length Displays the cable length.
Channel Displays the cable’s channel.
Polarty Automatic polarity detection and correction
allows for automatic adjustment of wiring errors on all
RJ-45 ports.
Par Skew Reaction or transmission time in
nanoseconds for the selected cable pair and given
cable length.
Test Now Press this button to begin the cable test.
Admin > Cable Test - Gigabit Ports > Copper Cable Extended Feature
•
•
•
•
•
•
•
•
•
•
•
Admin > Save Configuration
Admin > Save Configuration
The Save Configuration screen allows you to upload Switch
configuration files to a TFTP server, or to download saved
Switch configuration files from a TFTP server or from your
computer via the HTTP interface.
Va TFTP Select this to upload to or download from a
TFTP server. When you select this option, the following
fields are displayed.
UPGRADE Select this option to restore the Switch
configuration from the file located on a TFTP server.
TFTP Server Enter the TFTP Server IP Address that
contains the source file to download.
Fle Name Enter the name of the configuration file
on the TFTP Server.
BACKUP To back up the Switch configuration to a
TFTP server, enter the TFTP server address.
TFTP Server Enter the TFTP Server IP Address to
which the configuration file will be saved.
Fle Name Enter the name of the configuration
file. The default is none (blank).
Va HTTP Select this to download a configuration file to
the Switch from your computer using the HTTP interface.
(HTTP only supports the upgrade operation. You cannot
back up the configuration file using HTTP.) When you
select this option, the following field is displayed.
Source Fle Enter the name and path of the file or
click Browse to locate the configuration file.
Click Save Settngs to begin the download or upload.
After you have downloaded the configuration file to the
Switch during an upgrade, the configuration file’s settings
will not take effect until the system is rebooted.
•
•
•
•
•
•
•