Lanier JP1030 - Manual (Page 14)

2
Machine Interior
1. Paper alignment wings
Lift or lower the wings depending on the
type of paper being used.
2. Paper delivery side plates
Use to align the prints on the paper deliv-
ery tray.
3. Paper delivery end plate
Use to align the leading edge of prints.
4. Paper delivery tray
Completed prints are delivered here.
5. Main switch
Use to turn the power on or off.
6. Drum unit
The master is wrapped around this unit.
7. Drum unit lock lever
Lift to unlock and pull out the drum unit.
8. Ink holder
Set the ink cartridge in this holder.
9. Exposure glass
Position originals here face down for
printing.
10. Master eject box
Pull out this box to remove the used mas-
ters.
PinkGold-F_V4_FM.book Page 2 Tuesday, September 11, 2001 6:31 PM