Lanier JP1030 - Manual (Page 82)

Replenishing Supplies
70
4
Placing a New Roll of Tape in the Tape
Dispenser (Option)
Note
❒ Make sure that the main switch is
turned on and the power switch of
the tape dispenser is off.
AAAA
Open the cover of the tape dis-
penser.
BBBB
As shown, put the roll in the dis-
penser.
Note
❒ Make sure that the tape is in-
stalled in the proper direction. If
it is not in the correct direction,
the tape dispenser will not work
correctly.
CCCC
Feed the leading edge of the roll
in the dispensing slot until it
stops.
Note
❒ Push the tape as far as possible
through the slot.
DDDD
Turn on the power switch of the
tape dispenser.
EEEE
Press the manual cut button to
trim off the leading edge of the
tape.
TSLP010E
TSLP011E
TSLP012E
TSLP013E
On
Off
TSLP014E
PinkGold-F_V4_FM.book Page 70 Tuesday, September 11, 2001 6:31 PM