Lanier JP1030 - Manual (Page 63)

Color Printing Using the Optional Color Drum
51
2
CCCC
Pull out the drum unit handle.
Note
❒ If you cannot pull out the drum
unit, push the drum unit han-
dle, then pull out the drum unit.
DDDD
Hold the rail on the drum and
slide out the drum while pulling
the release towards you.
EEEE
Remove the drum unit from the
machine while holding the upper
drum stay.
Note
❒ Be careful not to let the drum
unit fall.
FFFF
Insert the color drum unit along
the guide rail.
GGGG
Slide in the drum unit until it
locks in position.
HHHH
Lower the drum unit lock lever.
IIII
Close the front door.
Note
❒ Make sure that the open cov-
er/unit indicator (
M) turns off,
and the “Color” is displayed on
the operation panel.
PinkGold-F_V4_FM.book Page 51 Tuesday, September 11, 2001 6:31 PM