Lanier JP1030 - Manual (Page 21)

Originals
9
1
Originals
• The maximum original size you can place on the exposure glass is 304.8
×
432mm, 12"
× 17".
• If you use originals that have bold letters or solid images at the leading edges,
you might get prints with dirty edges. In this case, place the original face
down with the widest margin toward the paper delivery tray or raise the
printing speed.
• Place originals after correction fluid and ink have completely dried. Not tak-
ing this precaution could mark the exposure glass and cause marks to be
printed.
• The first 5mm, 0.2", of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5mm, 0.2".
a = 5mm, 0.2"
Original Print
a
PinkGold-F_V4_FM.book Page 9 Tuesday, September 11, 2001 6:31 PM